Daily Archives: April 20, 2014


How to Calibrate the Station 7

We recommend you calibrate the Calibration Station yearly. When adjustment is required follow these steps:

  1. Loosen wing nuts on back, but do not remove them.
  2. Make sure they are only loose enough to move the black frame
  3. Place a calibrated level on the vertical or bottom side of the frame and adjust station to the level.
  4. Tighten wing nuts
  5. Your done!

We sell a kit that gives you all the tools you need to get the job done. The validation kit provides an easy way to validate your mounted Calibration Station is up to NIST standards. Click here to order your kit.

That was easy. Almost as easy as it is to use the Calibration Station to check if your tools are calibrated.